This is the latest recevied telemetry packets stored in our database for station/object CE3WIT-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764996505 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1764995605 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1764994705 | 4.75 VDC | 0 | 0 | 0 | 0 |
| 1764993804 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1764992903 | 4.65 VDC | 0 | 0 | 0 | 0 |
| 1764992003 | 4.85 VDC | 0 | 0 | 0 | 0 |
| 1764991102 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1764990202 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1764989302 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1764988402 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1764987502 | 4.8 VDC | 0 | 0 | 0 | 0 |
| 1764986602 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1764985702 | 4.54 VDC | 0 | 0 | 0 | 0 |
| 1764984802 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1764983902 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1764983001 | 4.65 VDC | 0 | 0 | 0 | 0 |
| 1764982102 | 4.42 VDC | 0 | 0 | 0 | 0 |
| 1764981201 | 4.5 VDC | 0 | 0 | 0 | 0 |
| 1764980301 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1764979401 | 4.72 VDC | 0 | 0 | 0 | 0 |
| 1764978501 | 4.6 VDC | 0 | 0 | 0 | 0 |
| 1764977601 | 4.52 VDC | 0 | 0 | 0 | 0 |
| 1764976701 | 4.81 VDC | 0 | 0 | 0 | 0 |
| 1764975801 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1764974901 | 4.29 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)