This is the latest recevied telemetry packets stored in our database for station/object SQ8BS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769657824 | 0 Count | 890 Count | 0 Count | 4.41 VDC | 0 VDC |
| 1769657524 | 0 Count | 885 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769657223 | 0 Count | 880 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1769656923 | 0 Count | 872 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1769656623 | 0 Count | 866 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1769656323 | 0 Count | 862 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769656023 | 0 Count | 856 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1769655723 | 0 Count | 850 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769655423 | 0 Count | 844 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769655123 | 0 Count | 839 Count | 0 Count | 4.36 VDC | 0 VDC |
| 1769654823 | 0 Count | 832 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769654523 | 0 Count | 823 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1769653631 | 0 Count | 802 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769653331 | 0 Count | 795 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1769653031 | 0 Count | 789 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769652731 | 0 Count | 785 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1769652431 | 0 Count | 779 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1769652131 | 0 Count | 772 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769651831 | 0 Count | 767 Count | 0 Count | 4.52 VDC | 0 VDC |
| 1769651531 | 0 Count | 760 Count | 0 Count | 4.51 VDC | 0 VDC |
| 1769651231 | 0 Count | 755 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1769650930 | 0 Count | 751 Count | 0 Count | 4.46 VDC | 0 VDC |
| 1769650631 | 0 Count | 747 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1769650330 | 0 Count | 741 Count | 0 Count | 4.39 VDC | 0 VDC |
| 1769650030 | 0 Count | 735 Count | 0 Count | 4.26 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)