This is the latest recevied telemetry packets stored in our database for station/object WB8ELK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Solar* | Temp* | Sats* | Lock* | Value5* |
|---|---|---|---|---|---|
| 1785803146 | 3.56 Volts | -15 Deg C | 11 | 1 | 1 |
| 1785803026 | 3.7 Volts | -19 Deg C | 8 | 1 | 1 |
| 1785802906 | 3.3 Volts | -4 Deg C | 8 | 1 | 1 |
| 1785802768 | 3.44 Volts | -14 Deg C | 7 | 1 | 1 |
| 1785802642 | 3.54 Volts | -27 Deg C | 8 | 1 | 1 |
| 1785802519 | 3.84 Volts | -12 Deg C | 8 | 1 | 1 |
| 1785802393 | 3.92 Volts | -9 Deg C | 8 | 1 | 1 |
| 1785802273 | 3.8 Volts | -18 Deg C | 6 | 1 | 1 |
| 1785802147 | 3.56 Volts | -30 Deg C | 7 | 1 | 1 |
| 1785802015 | 3.82 Volts | -17 Deg C | 8 | 1 | 1 |
| 1785801889 | 3.92 Volts | -14 Deg C | 8 | 1 | 1 |
| 1785801763 | 3.92 Volts | -6 Deg C | 6 | 1 | 1 |
| 1785801634 | 4.06 Volts | -5 Deg C | 7 | 1 | 1 |
| 1785801508 | 3.78 Volts | -24 Deg C | 8 | 1 | 1 |
| 1785801373 | 4.04 Volts | -11 Deg C | 7 | 1 | 1 |
| 1785801241 | 4.18 Volts | -5 Deg C | 8 | 1 | 1 |
| 1785801115 | 4 Volts | -14 Deg C | 8 | 1 | 1 |
| 1785800983 | 4.12 Volts | -2 Deg C | 8 | 1 | 1 |
| 1785800851 | 4.12 Volts | 4 Deg C | 8 | 1 | 1 |
| 1785800719 | 4.36 Volts | -4 Deg C | 8 | 1 | 1 |
| 1785800599 | 4.42 Volts | -10 Deg C | 8 | 1 | 1 |
| 1785800476 | 4.46 Volts | -9 Deg C | 8 | 1 | 1 |
| 1785800357 | 4.44 Volts | -28 Deg C | 8 | 1 | 1 |
| 1785800233 | 4.52 Volts | -20 Deg C | 8 | 6 | 1 |
| 1785800113 | 4.3 Volts | -5 Deg C | 8 | 1 | 1 |
*Used Equation Coefficients:
Solar: 0, 0.01, 0
Temp: 0, 1, -273
Sats: 0, 1, 0
Lock: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)