This is the latest recevied telemetry packets stored in our database for station/object SV9TNF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775226096 | 867 Count | 383 Count | 383 Count | 0 VDC | 0 VDC |
| 1775225792 | 865 Count | 382 Count | 382 Count | 0 VDC | 0 VDC |
| 1775225488 | 863 Count | 381 Count | 381 Count | 0 VDC | 0 VDC |
| 1775225185 | 861 Count | 380 Count | 380 Count | 0 VDC | 0 VDC |
| 1775224881 | 859 Count | 379 Count | 379 Count | 0 VDC | 0 VDC |
| 1775224577 | 857 Count | 378 Count | 378 Count | 0 VDC | 0 VDC |
| 1775224320 | 856 Count | 378 Count | 378 Count | 0 VDC | 0 VDC |
| 1775224016 | 854 Count | 377 Count | 377 Count | 0 VDC | 0 VDC |
| 1775223711 | 852 Count | 376 Count | 376 Count | 0 VDC | 0 VDC |
| 1775223407 | 850 Count | 375 Count | 375 Count | 0 VDC | 0 VDC |
| 1775223104 | 848 Count | 374 Count | 374 Count | 0 VDC | 0 VDC |
| 1775222800 | 846 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775222496 | 845 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775222192 | 844 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775221888 | 843 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775221584 | 842 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775221281 | 841 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775220977 | 840 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775220719 | 839 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775220415 | 838 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775220111 | 837 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775219807 | 836 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775219503 | 835 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775219199 | 834 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
| 1775218896 | 833 Count | 373 Count | 373 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)