This is the latest recevied telemetry packets stored in our database for station/object EA5GMC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785836621 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1785835720 | 0.66 VDC | 0 | 0 | 0 | 0 |
| 1785834820 | 0.68 VDC | 0 | 0 | 0 | 0 |
| 1785833920 | 0.68 VDC | 0 | 0 | 0 | 0 |
| 1785833020 | 0.7 VDC | 0 | 0 | 0 | 0 |
| 1785832120 | 0.72 VDC | 0 | 0 | 0 | 0 |
| 1785831219 | 0.72 VDC | 0 | 0 | 0 | 0 |
| 1785830319 | 0.72 VDC | 0 | 0 | 0 | 0 |
| 1785829419 | 0.74 VDC | 0 | 0 | 0 | 0 |
| 1785828519 | 0.74 VDC | 0 | 0 | 0 | 0 |
| 1785827619 | 0.76 VDC | 0 | 0 | 0 | 0 |
| 1785826718 | 0.76 VDC | 0 | 0 | 0 | 0 |
| 1785825817 | 0.8 VDC | 0 | 0 | 0 | 0 |
| 1785824917 | 0.8 VDC | 0 | 0 | 0 | 0 |
| 1785824017 | 0.82 VDC | 0 | 0 | 0 | 0 |
| 1785823117 | 0.7 VDC | 0 | 0 | 0 | 0 |
| 1785822216 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1785821316 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785820416 | 0.82 VDC | 0 | 0 | 0 | 0 |
| 1785819516 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1785818616 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785817716 | 0.84 VDC | 0 | 0 | 0 | 0 |
| 1785816816 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1785815916 | 0.86 VDC | 0 | 0 | 0 | 0 |
| 1785815016 | 0.86 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)