This is the latest recevied telemetry packets stored in our database for station/object AA5SG-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775169581 | 482 | 633 | 0 | 0 | 0 |
| 1775169459 | 473 | 632 | 0 | 0 | 0 |
| 1775169248 | 482 | 629 | 0 | 0 | 0 |
| 1775169171 | 488 | 627 | 0 | 0 | 0 |
| 1775169134 | 501 | 626 | 0 | 0 | 0 |
| 1775169129 | 493 | 626 | 0 | 0 | 0 |
| 1775169073 | 491 | 626 | 0 | 0 | 0 |
| 1775168454 | 481 | 630 | 0 | 0 | 0 |
| 1775168389 | 490 | 628 | 0 | 0 | 0 |
| 1775168383 | 486 | 628 | 0 | 0 | 0 |
| 1775168379 | 493 | 628 | 0 | 0 | 0 |
| 1775168345 | 492 | 628 | 0 | 0 | 0 |
| 1775168277 | 483 | 626 | 0 | 0 | 0 |
| 1775168226 | 473 | 625 | 0 | 0 | 0 |
| 1775168134 | 490 | 623 | 0 | 0 | 0 |
| 1775168105 | 495 | 623 | 0 | 0 | 0 |
| 1775162027 | 477 | 634 | 0 | 0 | 0 |
| 1775161874 | 480 | 633 | 0 | 0 | 0 |
| 1775161764 | 479 | 631 | 0 | 0 | 0 |
| 1775161750 | 476 | 631 | 0 | 0 | 0 |
| 1775161745 | 480 | 631 | 0 | 0 | 0 |
| 1775161683 | 478 | 630 | 0 | 0 | 0 |
| 1775161422 | 495 | 625 | 0 | 0 | 0 |
| 1775161417 | 488 | 625 | 0 | 0 | 0 |
| 1775161378 | 490 | 625 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)