This is the latest recevied telemetry packets stored in our database for station/object 9W2IMV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Ext* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769642287 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769641420 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769640517 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769639616 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769638715 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769637813 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769636912 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769636010 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769635109 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769634207 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769633306 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769632404 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769631503 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769630602 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769629700 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769628799 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769627897 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769626996 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769626095 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769625193 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769624292 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769623391 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769622489 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769621588 | 0.54 VDC | 0 | 0 | 0 | 0 |
| 1769620686 | 0.54 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Ext: 0, 0.02, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)