This is the latest recevied telemetry packets stored in our database for station/object EA1AB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1775220592 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1775219689 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1775219505 | 3.28 VDC | 719 | 3659 | 8279 | 0 |
| 1775218786 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1775218602 | 3.5 VDC | 720 | 3727 | 8277 | 0 |
| 1775217883 | 4.08 VDC | 0 | 0 | 0 | 0 |
| 1775217699 | 3.61 VDC | 720 | 3803 | 8276 | 0 |
| 1775216980 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1775216796 | 3.68 VDC | 721 | 3777 | 8280 | 0 |
| 1775216077 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1775215893 | 3.71 VDC | 721 | 3760 | 0 | 0 |
| 1775215174 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1775214990 | 3.73 VDC | 721 | 3778 | 8280 | 0 |
| 1775214271 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1775214087 | 3.76 VDC | 722 | 3742 | 8275 | 0 |
| 1775213368 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1775213184 | 3.78 VDC | 722 | 3725 | 8278 | 0 |
| 1775212465 | 4.1 VDC | 0 | 0 | 0 | 0 |
| 1775212281 | 3.8 VDC | 722 | 3714 | 0 | 0 |
| 1775211562 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775211378 | 3.82 VDC | 722 | 3750 | 8276 | 0 |
| 1775210659 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1775210475 | 3.84 VDC | 723 | 3799 | 8274 | 0 |
| 1775209756 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1775209572 | 3.86 VDC | 722 | 3915 | 8277 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 1, 0
Rel_Hum: 0, 1, 0
Atm_Press: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)