This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769642885 | 20 Count | 1328 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769641085 | 16 Count | 987 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769637514 | 3 Count | 333 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769635712 | 16 Count | 1319 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769633911 | 12 Count | 996 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769632111 | 7 Count | 674 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769630312 | 3 Count | 338 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769628509 | 13 Count | 1113 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769623107 | 23 Count | 1019 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769621307 | 19 Count | 681 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769619507 | 14 Count | 362 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769617706 | 8 Count | 129 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769615904 | 4 Count | 44 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769614104 | 141 Count | 1090 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769612303 | 137 Count | 993 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769610503 | 130 Count | 951 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769608692 | 126 Count | 906 Count | 0 Count | 3.97 VDC | 0 VDC |
| 1769606886 | 121 Count | 812 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769605086 | 117 Count | 778 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769603285 | 111 Count | 696 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769601484 | 99 Count | 624 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769599684 | 96 Count | 580 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769597883 | 93 Count | 543 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769595141 | 82 Count | 504 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1769593340 | 78 Count | 470 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)