This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780605925 | 0 Count | 1005 Count | 0 Count | 0 VDC | 0 VDC |
| 1780605025 | 0 Count | 979 Count | 0 Count | 0 VDC | 0 VDC |
| 1780604125 | 0 Count | 947 Count | 0 Count | 0 VDC | 0 VDC |
| 1780603224 | 0 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1780602324 | 0 Count | 867 Count | 0 Count | 0 VDC | 0 VDC |
| 1780601424 | 0 Count | 836 Count | 0 Count | 0 VDC | 0 VDC |
| 1780600522 | 0 Count | 801 Count | 0 Count | 0 VDC | 0 VDC |
| 1780599622 | 0 Count | 756 Count | 0 Count | 0 VDC | 0 VDC |
| 1780598722 | 0 Count | 721 Count | 0 Count | 0 VDC | 0 VDC |
| 1780597822 | 0 Count | 689 Count | 0 Count | 0 VDC | 0 VDC |
| 1780596922 | 0 Count | 656 Count | 0 Count | 0 VDC | 0 VDC |
| 1780596022 | 0 Count | 629 Count | 0 Count | 0 VDC | 0 VDC |
| 1780595122 | 0 Count | 606 Count | 0 Count | 0 VDC | 0 VDC |
| 1780594222 | 0 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1780593322 | 0 Count | 551 Count | 0 Count | 0 VDC | 0 VDC |
| 1780592421 | 0 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1780591521 | 0 Count | 495 Count | 0 Count | 0 VDC | 0 VDC |
| 1780590621 | 0 Count | 468 Count | 0 Count | 0 VDC | 0 VDC |
| 1780589721 | 0 Count | 430 Count | 0 Count | 0 VDC | 0 VDC |
| 1780588821 | 0 Count | 402 Count | 0 Count | 0 VDC | 0 VDC |
| 1780587921 | 0 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1780587021 | 0 Count | 330 Count | 0 Count | 0 VDC | 0 VDC |
| 1780586121 | 0 Count | 282 Count | 0 Count | 0 VDC | 0 VDC |
| 1780585221 | 0 Count | 243 Count | 0 Count | 0 VDC | 0 VDC |
| 1780584321 | 0 Count | 202 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)