APRS Track Direct

My position About ☰

reset

E23JWE-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E23JWE-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TEMP*	HUM*	BAR *	VBAT*
1782561618	27.1 °C	81.5 %RH	1008 hPa	3.76 V
1782560635	26.99 °C	81.4 %RH	1007.6 hPa	3.77 V
1782559647	26.98 °C	80.6 %RH	1007.4 hPa	3.77 V
1782558675	27.14 °C	79.2 %RH	1007.2 hPa	3.77 V
1782557683	27.27 °C	78.5 %RH	1007.3 hPa	3.78 V
1782556716	27.36 °C	77.2 %RH	1007.1 hPa	3.77 V
1782555719	26.95 °C	77.8 %RH	1007 hPa	3.78 V
1782554748	26.89 °C	81.3 %RH	1006.8 hPa	3.77 V
1782553764	27.06 °C	80.7 %RH	1007 hPa	3.78 V
1782552791	26.81 °C	79.6 %RH	1007 hPa	3.78 V
1782551816	29.38 °C	73.6 %RH	1006.7 hPa	3.78 V
1782550850	30.74 °C	70.1 %RH	1006.9 hPa	3.78 V
1782548853	31.12 °C	67.9 %RH	1007 hPa	3.8 V
1782547869	31.91 °C	66.5 %RH	1007.4 hPa	3.8 V
1782546876	31.13 °C	67.4 %RH	1007.5 hPa	3.79 V
1782545841	32.37 °C	63.4 %RH	1007.8 hPa	3.8 V
1782545809	32.37 °C	63.9 %RH	1007.8 hPa	3.8 V
1782544745	31.29 °C	66.4 %RH	1007.8 hPa	3.77 V
1782543713	31.27 °C	66.5 %RH	1008.1 hPa	3.78 V
1782542677	31.97 °C	65.5 %RH	1008.5 hPa	3.8 V
1782541645	32.59 °C	66.3 %RH	1008.8 hPa	3.8 V
1782540614	31.9 °C	65.4 %RH	1008.8 hPa	3.79 V
1782539567	30.98 °C	71.2 %RH	1009 hPa	3.78 V
1782537508	30.2 °C	76.5 %RH	1009.5 hPa	3.76 V
1782536532	29.19 °C	81.4 %RH	1009.4 hPa	3.76 V

*Used Equation Coefficients:

TEMP: 0, 0.01, 0

HUM: 0, 0.1, 0

BAR : 0, 0.1, 800

VBAT: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)