This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1769675831 | 35.2 °C | 57.1 %RH | 1010.3 hPa | 13.44 V | 27 |
| 1769669756 | 32.61 °C | 63.3 %RH | 1011.5 hPa | 13.57 V | 28 |
| 1769663679 | 28.74 °C | 62.9 %RH | 1013.3 hPa | 13.57 V | 26 |
| 1769657604 | 26.19 °C | 60.6 %RH | 1015.1 hPa | 13.3 V | 28 |
| 1769651530 | 24.41 °C | 61.5 %RH | 1014.5 hPa | 13.25 V | 27 |
| 1769645454 | 23.88 °C | 59.8 %RH | 1013.5 hPa | 13.3 V | 28 |
| 1769639378 | 24.39 °C | 59.5 %RH | 1012.5 hPa | 13.25 V | 30 |
| 1769633304 | 25.13 °C | 58.9 %RH | 1012.4 hPa | 13.25 V | 27 |
| 1769627227 | 25.99 °C | 58.6 %RH | 1013 hPa | 13.25 V | 28 |
| 1769621153 | 26.87 °C | 58.4 %RH | 1013.6 hPa | 13.23 V | 28 |
| 1769615076 | 28.11 °C | 58 %RH | 1014.1 hPa | 13.3 V | 30 |
| 1769608999 | 29.7 °C | 57.1 %RH | 1013.6 hPa | 13.3 V | 28 |
| 1769602925 | 31.63 °C | 56.7 %RH | 1012.3 hPa | 13.31 V | 30 |
| 1769596846 | 34.03 °C | 56.8 %RH | 1011.5 hPa | 13.34 V | 27 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)