This is the latest recevied telemetry packets stored in our database for station/object HB3YNV-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1765874631 | 4.03 | 9.2 | 45.65 | 1022.38 | 0 |
| 1765866468 | 4.08 | 17.2 | 41.24 | 1021.13 | 0 |
| 1765863343 | 4.13 | 21.2 | 43.01 | 1003.88 | 0 |
| 1765862372 | 4.17 | 21 | 43.54 | 932.25 | 0 |
| 1765860183 | 4.17 | 21.1 | 43.06 | 885 | 0 |
| 1765859433 | 4.17 | 21.1 | 42.87 | 969.13 | 0 |
| 1765857793 | 4.17 | 21.2 | 42.94 | 1014.88 | 0 |
| 1765816986 | 3.56 | 22.9 | 39.2 | 887.75 | 0 |
| 1765813262 | 3.62 | 22.9 | 39.14 | 895.88 | 0 |
| 1765808718 | 3.69 | 23 | 37.98 | 880.88 | 0 |
| 1765803437 | 3.75 | 23.1 | 32.35 | 1026 | 0 |
| 1765803198 | 3.75 | 22.5 | 32.33 | 1026.13 | 0 |
| 1765802969 | 3.76 | 21.7 | 32.56 | 1025.5 | 0 |
| 1765797606 | 3.82 | 20.1 | 39.17 | 1012.25 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)