This is the latest recevied telemetry packets stored in our database for station/object BM4AIK-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1785929247 | 7 | 830 C | 357 V | 5 M | 0 |
| 1785929126 | 8 | 831 C | 357 V | 3 M | 0 |
| 1785929003 | 8 | 831 C | 358 V | 4 M | 0 |
| 1785928883 | 9 | 829 C | 359 V | 2 M | 0 |
| 1785928668 | 9 | 823 C | 358 V | 2 M | 0 |
| 1785928304 | 8 | 821 C | 359 V | 1 M | 0 |
| 1785927099 | 7 | 822 C | 366 V | 2 M | 0 |
| 1785927005 | 7 | 821 C | 367 V | 1 M | 0 |
| 1785926882 | 8 | 820 C | 367 V | 1 M | 0 |
| 1785926762 | 8 | 816 C | 368 V | 1 M | 0 |
| 1785926642 | 7 | 808 C | 368 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 1, 0
Volt: 0, 1, 0
Alt: 0, 1, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)