This is the latest recevied telemetry packets stored in our database for station/object N3CFX-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1765743614 | 12 | 40.5 C | 3.96 V | 20 M | 0 |
| 1765741157 | 12 | 40.4 C | 3.97 V | 0 M | 0 |
| 1765739233 | 12 | 26.8 C | 3.97 V | 0 M | 0 |
| 1765736473 | 12 | 27 C | 4.01 V | 0 M | 0 |
| 1765735859 | 12 | 29.4 C | 4.02 V | 0 M | 0 |
| 1765734920 | 12 | 26.5 C | 4.03 V | 0 M | 0 |
| 1765733430 | 12 | 25.3 C | 4.06 V | 10 M | 0 |
| 1765732212 | 12 | 24.9 C | 4.05 V | 0 M | 0 |
| 1765731802 | 12 | 24.1 C | 4.06 V | 0 M | 0 |
| 1765730050 | 12 | 23.5 C | 4.08 V | 10 M | 0 |
| 1765728701 | 12 | 23.8 C | 4.09 V | 20 M | 0 |
| 1765728083 | 12 | 22.8 C | 4.09 V | 10 M | 0 |
| 1765727094 | 12 | 22.1 C | 4.11 V | 10 M | 0 |
| 1765725604 | 12 | 21.3 C | 4.11 V | 20 M | 0 |
| 1765725116 | 12 | 20.6 C | 4.12 V | 10 M | 0 |
| 1765724440 | 12 | 21.6 C | 4.12 V | 10 M | 0 |
| 1765723930 | 12 | 21.8 C | 4.13 V | 20 M | 0 |
| 1765723480 | 12 | 22.6 C | 4.14 V | 10 M | 0 |
| 1765723314 | 12 | 22.4 C | 4.13 V | 20 M | 0 |
| 1765722162 | 12 | 21.1 C | 4.15 V | 0 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)