This is the latest recevied telemetry packets stored in our database for station/object WB5PJB-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764978248 | 10.3 C | 39.85 % | 0 hPa | 0 | 0 |
| 1764978077 | 9.8 C | 40.48 % | 0 hPa | 0 | 0 |
| 1764977899 | 9.3 C | 40.47 % | 0 hPa | 0 | 0 |
| 1764977606 | 8.7 C | 41.87 % | 1034.13 hPa | 0 | 0 |
| 1764977204 | 8.1 C | 40.79 % | 1034.63 hPa | 0 | 0 |
| 1764976987 | 8 C | 39.75 % | 1033.63 hPa | 0 | 0 |
| 1764976672 | 8 C | 36.09 % | 817.25 hPa | 0 | 0 |
| 1764966742 | 12.8 C | 36.96 % | 1031.88 hPa | 0 | 0 |
| 1764966515 | 12.1 C | 37.96 % | 1031.88 hPa | 0 | 0 |
| 1764966278 | 11.6 C | 38.64 % | 822 hPa | 0 | 0 |
| 1764965987 | 10.5 C | 39.36 % | 1033.13 hPa | 0 | 0 |
| 1764965014 | 9.1 C | 36.55 % | 830.88 hPa | 0 | 0 |
| 1764958205 | 6.4 C | 40.25 % | 1030.63 hPa | 0 | 0 |
| 1764957708 | 5.4 C | 38.67 % | 0 hPa | 0 | 0 |
| 1764957447 | 5.1 C | 38.62 % | 817.63 hPa | 0 | 0 |
| 1764944721 | 6.7 C | 40.65 % | 1032.63 hPa | 0 | 0 |
| 1764944535 | 6.4 C | 39.09 % | 1032.38 hPa | 0 | 0 |
| 1764944353 | 6.3 C | 39.39 % | 1031.13 hPa | 0 | 0 |
| 1764944117 | 6.2 C | 38.03 % | 0 hPa | 0 | 0 |
| 1764943894 | 6.1 C | 35.88 % | 1031.13 hPa | 0 | 0 |
| 1764943720 | 6.1 C | 34.1 % | 0 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)