This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769638662 | 434 | 599 | 0 | 0 | 0 |
| 1769636870 | 438 | 601 | 0 | 0 | 0 |
| 1769635078 | 418 | 601 | 0 | 0 | 0 |
| 1769633286 | 449 | 602 | 0 | 0 | 0 |
| 1769631494 | 434 | 602 | 0 | 0 | 0 |
| 1769627911 | 428 | 598 | 0 | 0 | 0 |
| 1769626120 | 424 | 595 | 0 | 0 | 0 |
| 1769624328 | 425 | 591 | 0 | 0 | 0 |
| 1769622537 | 418 | 587 | 0 | 0 | 0 |
| 1769618955 | 414 | 582 | 0 | 0 | 0 |
| 1769617164 | 411 | 582 | 0 | 0 | 0 |
| 1769615373 | 411 | 576 | 0 | 0 | 0 |
| 1769613582 | 409 | 575 | 0 | 0 | 0 |
| 1769611790 | 409 | 573 | 0 | 0 | 0 |
| 1769609999 | 409 | 573 | 0 | 0 | 0 |
| 1769608207 | 408 | 573 | 0 | 0 | 0 |
| 1769606417 | 409 | 574 | 0 | 0 | 0 |
| 1769604625 | 409 | 572 | 0 | 0 | 0 |
| 1769602834 | 409 | 573 | 0 | 0 | 0 |
| 1769601042 | 409 | 572 | 0 | 0 | 0 |
| 1769599251 | 409 | 572 | 0 | 0 | 0 |
| 1769597460 | 410 | 572 | 0 | 0 | 0 |
| 1769595669 | 410 | 573 | 0 | 0 | 0 |
| 1769593877 | 410 | 574 | 0 | 0 | 0 |
| 1769592086 | 411 | 574 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)