This is the latest recevied telemetry packets stored in our database for station/object DO2HN-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791136431 | 22.6 C | 37.02 % | 1030.75 hPa | 0 | 0 |
| 1791135527 | 23 C | 37.26 % | 1031.88 hPa | 0 | 0 |
| 1791134623 | 23.5 C | 36.71 % | 1032.25 hPa | 0 | 0 |
| 1791133719 | 23.9 C | 36.43 % | 1032.88 hPa | 0 | 0 |
| 1791132815 | 24.4 C | 35.65 % | 1030 hPa | 0 | 0 |
| 1791131911 | 24.9 C | 35.18 % | 1029.13 hPa | 0 | 0 |
| 1791131007 | 25.5 C | 34.75 % | 1032 hPa | 0 | 0 |
| 1791130103 | 26.2 C | 33.78 % | 1031.63 hPa | 0 | 0 |
| 1791129199 | 27.1 C | 32.38 % | 1030 hPa | 0 | 0 |
| 1791128295 | 28.4 C | 30.71 % | 1032.5 hPa | 0 | 0 |
| 1791127391 | 29.4 C | 29.78 % | 1030.63 hPa | 0 | 0 |
| 1791127375 | 29.3 C | 30.12 % | 1031.13 hPa | 0 | 0 |
| 1791127358 | 29.3 C | 30.12 % | 1030.88 hPa | 0 | 0 |
| 1791127342 | 29.3 C | 30.12 % | 1030.88 hPa | 0 | 0 |
| 1791127326 | 29.3 C | 30.12 % | 1031.38 hPa | 0 | 0 |
| 1791127306 | 29.3 C | 30.21 % | 1030.75 hPa | 0 | 0 |
| 1791127237 | 29.2 C | 30.31 % | 1030 hPa | 0 | 0 |
| 1791127205 | 29.2 C | 30.31 % | 1029.88 hPa | 0 | 0 |
| 1791127151 | 29.1 C | 30.44 % | 1029.63 hPa | 0 | 0 |
| 1791127119 | 29 C | 29.92 % | 1027.38 hPa | 0 | 0 |
| 1791127097 | 29 C | 29.92 % | 1030.13 hPa | 0 | 0 |
| 1791127081 | 29 C | 29.92 % | 1029.13 hPa | 0 | 0 |
| 1791127065 | 28.9 C | 30.09 % | 1031.13 hPa | 0 | 0 |
| 1791127044 | 28.9 C | 30.09 % | 1031.13 hPa | 0 | 0 |
| 1791127010 | 28.7 C | 30.39 % | 1026.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)