This is the latest recevied telemetry packets stored in our database for station/object DL7AD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1775261386 | 4.19 V | 0 V | 322 mW | 31 degC | 100712.5 Pa |
| 1775261243 | 4.19 V | 0 V | 310 mW | 31 degC | 100712.5 Pa |
| 1775261100 | 4.19 V | 0 V | 324 mW | 31.5 degC | 100725 Pa |
| 1775260957 | 4 V | 0 V | 308 mW | 31.9 degC | 100725 Pa |
| 1775260814 | 4 V | 0 V | 308 mW | 32 degC | 100712.5 Pa |
| 1775260671 | 4 V | 0 V | 320 mW | 32.4 degC | 100712.5 Pa |
| 1775260528 | 4 V | 0 V | 308 mW | 32 degC | 100712.5 Pa |
| 1775260385 | 3.99 V | 0 V | 310 mW | 32.5 degC | 100712.5 Pa |
| 1775260242 | 3.99 V | 0 V | 320 mW | 32.2 degC | 100725 Pa |
| 1775260099 | 3.99 V | 0 V | 310 mW | 32.4 degC | 100725 Pa |
| 1775259956 | 3.99 V | 0 V | 320 mW | 32.7 degC | 100725 Pa |
| 1775259813 | 4 V | 0 V | 302 mW | 32.1 degC | 100737.5 Pa |
| 1775259670 | 3.99 V | 0 V | 306 mW | 32.3 degC | 100737.5 Pa |
| 1775259527 | 4 V | 0 V | 320 mW | 31.7 degC | 100737.5 Pa |
| 1775259384 | 3.99 V | 0 V | 310 mW | 31.3 degC | 100750 Pa |
| 1775259241 | 3.99 V | 0 V | 288 mW | 31.3 degC | 100737.5 Pa |
| 1775259097 | 3.99 V | 0 V | 308 mW | 31.1 degC | 100750 Pa |
| 1775258954 | 4 V | 0 V | 308 mW | 31.2 degC | 100750 Pa |
| 1775258668 | 4 V | 0 V | 306 mW | 30.8 degC | 100762.5 Pa |
| 1775258525 | 4 V | 0 V | 306 mW | 31.1 degC | 100750 Pa |
| 1775258099 | 4.19 V | 0 V | 274 mW | 29.8 degC | 100762.5 Pa |
| 1775257940 | 4.19 V | 0 V | 314 mW | 29.8 degC | 100762.5 Pa |
| 1775257654 | 4.19 V | 0 V | 322 mW | 30.7 degC | 100775 Pa |
| 1775257512 | 4.19 V | 0 V | 310 mW | 30.5 degC | 100775 Pa |
| 1775257368 | 4.19 V | 0 V | 310 mW | 30.7 degC | 100775 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)