This is the latest recevied telemetry packets stored in our database for station/object F4BBI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791119253 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1791118352 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1791117452 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1791116552 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1791115652 | 4.56 VDC | 0 | 0 | 0 | 0 |
| 1791114752 | 4.53 VDC | 0 | 0 | 0 | 0 |
| 1791113852 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1791112952 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1791112052 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1791111152 | 4.41 VDC | 0 | 0 | 0 | 0 |
| 1791110252 | 4.63 VDC | 0 | 0 | 0 | 0 |
| 1791109351 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1791108451 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1791107551 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1791106651 | 4.28 VDC | 0 | 0 | 0 | 0 |
| 1791105751 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1791104851 | 4.35 VDC | 0 | 0 | 0 | 0 |
| 1791103951 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1791103051 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1791102151 | 4.45 VDC | 0 | 0 | 0 | 0 |
| 1791101251 | 4.59 VDC | 0 | 0 | 0 | 0 |
| 1791100350 | 4.37 VDC | 0 | 0 | 0 | 0 |
| 1791099450 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1791098550 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1791096750 | 4.31 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)