This is the latest recevied telemetry packets stored in our database for station/object KD0MRC-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791660251 | 466 | 602 | 0 | 0 | 0 |
| 1791659342 | 472 | 610 | 0 | 0 | 0 |
| 1791658737 | 426 | 615 | 0 | 0 | 0 |
| 1791658435 | 427 | 618 | 0 | 0 | 0 |
| 1791657528 | 430 | 618 | 0 | 0 | 0 |
| 1791657225 | 430 | 616 | 0 | 0 | 0 |
| 1791654499 | 431 | 613 | 0 | 0 | 0 |
| 1791654193 | 430 | 610 | 0 | 0 | 0 |
| 1791653891 | 430 | 607 | 0 | 0 | 0 |
| 1791653586 | 430 | 605 | 0 | 0 | 0 |
| 1791653011 | 430 | 608 | 0 | 0 | 0 |
| 1791653010 | 430 | 604 | 0 | 0 | 0 |
| 1791652974 | 430 | 606 | 0 | 0 | 0 |
| 1791652370 | 430 | 607 | 0 | 0 | 0 |
| 1791652066 | 430 | 604 | 0 | 0 | 0 |
| 1791651410 | 430 | 606 | 0 | 0 | 0 |
| 1791651093 | 430 | 608 | 0 | 0 | 0 |
| 1791650473 | 430 | 607 | 0 | 0 | 0 |
| 1791650171 | 430 | 607 | 0 | 0 | 0 |
| 1791649560 | 428 | 608 | 0 | 0 | 0 |
| 1791649255 | 427 | 608 | 0 | 0 | 0 |
| 1791648953 | 423 | 607 | 0 | 0 | 0 |
| 1791648023 | 428 | 604 | 0 | 0 | 0 |
| 1791647718 | 429 | 600 | 0 | 0 | 0 |
| 1791647416 | 433 | 597 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)