This is the latest recevied telemetry packets stored in our database for station/object SR2ZYT-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1765000694 | 919 Count | 896 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764998895 | 918 Count | 895 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764997095 | 917 Count | 894 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764995295 | 916 Count | 893 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764993497 | 915 Count | 892 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764991697 | 914 Count | 891 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764989897 | 913 Count | 890 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764988097 | 912 Count | 889 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764986298 | 911 Count | 888 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764984499 | 910 Count | 887 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764982700 | 909 Count | 886 Count | 378 Count | 3.6 VDC | 0 VDC |
| 1764980901 | 908 Count | 885 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764979101 | 907 Count | 884 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764977303 | 906 Count | 883 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764975505 | 905 Count | 882 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764973705 | 904 Count | 881 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764971904 | 903 Count | 880 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764970105 | 902 Count | 879 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764968303 | 901 Count | 878 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764964701 | 899 Count | 876 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764962901 | 898 Count | 875 Count | 378 Count | 3.61 VDC | 0 VDC |
| 1764961103 | 872 Count | 849 Count | 353 Count | 3.61 VDC | 0 VDC |
| 1764959304 | 871 Count | 848 Count | 353 Count | 3.61 VDC | 0 VDC |
| 1764957505 | 870 Count | 847 Count | 353 Count | 3.62 VDC | 0 VDC |
| 1764955706 | 869 Count | 846 Count | 353 Count | 3.62 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)