This is the latest recevied telemetry packets stored in our database for station/object OM7DD-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785836100 | 4.04 VDC | 44 C | 1012 hPa | 0 | 0 |
| 1785826310 | 4.07 VDC | 34 C | 1021.5 hPa | 0 | 0 |
| 1785822225 | 4.09 VDC | 32.6 C | 1021.63 hPa | 0 | 0 |
| 1785818270 | 4.14 VDC | 26.5 C | 982.75 hPa | 0 | 0 |
| 1785817229 | 3.45 VDC | 23.2 C | 1022.88 hPa | 0 | 0 |
| 1785815718 | 3.48 VDC | 20.4 C | 1022.5 hPa | 0 | 0 |
| 1785809023 | 3.53 VDC | 20.5 C | 1021.5 hPa | 0 | 0 |
| 1785803023 | 3.6 VDC | 21.6 C | 1022.75 hPa | 0 | 0 |
| 1785798220 | 3.64 VDC | 22.7 C | 1022 hPa | 0 | 0 |
| 1785791527 | 3.7 VDC | 24.5 C | 1022.5 hPa | 0 | 0 |
| 1785782622 | 3.78 VDC | 28.1 C | 1020 hPa | 0 | 0 |
| 1785773591 | 3.84 VDC | 34.7 C | 1017.5 hPa | 0 | 0 |
| 1785765594 | 3.9 VDC | 31.1 C | 1018.13 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)