This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785866266 | 0 Count | 82 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785862665 | 0 Count | 70 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785859065 | 0 Count | 57 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785855465 | 0 Count | 48 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785851865 | 0 Count | 40 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785848265 | 0 Count | 31 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785844665 | 0 Count | 23 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785841065 | 0 Count | 15 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785837466 | 68 Count | 1005 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785833866 | 38 Count | 997 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785830265 | 18 Count | 989 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785826665 | 11 Count | 980 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785823065 | 4 Count | 906 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785819465 | 4 Count | 896 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785815865 | 4 Count | 888 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785812265 | 4 Count | 879 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785808665 | 4 Count | 871 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785805064 | 4 Count | 863 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785801464 | 4 Count | 854 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785797864 | 4 Count | 846 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785794264 | 4 Count | 832 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785790664 | 4 Count | 824 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785787064 | 4 Count | 815 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1785783464 | 4 Count | 801 Count | 0 Count | 3.93 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)