APRS Track Direct

My position About ☰

reset

DL4MDW-14 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL4MDW-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Vsol*	Pbat*	Temp*	AirP*
1769646528	4.18 V	0.14 V	416 mW	18.41 degC	99762.5 Pa
1769646408	4.18 V	0.14 V	480 mW	18.54 degC	99750 Pa
1769646288	4.18 V	0.14 V	588 mW	18.54 degC	99750 Pa
1769646168	4.12 V	0.14 V	-112 mW	18.41 degC	99750 Pa
1769646048	4.13 V	0.14 V	-112 mW	18.46 degC	99750 Pa
1769645928	4.13 V	0.14 V	-112 mW	18.62 degC	99750 Pa
1769645688	4.13 V	0.14 V	-112 mW	18.6 degC	99750 Pa
1769645568	4.13 V	0.14 V	-112 mW	18.7 degC	99762.5 Pa
1769645448	4.13 V	0.14 V	-112 mW	18.57 degC	99750 Pa
1769645328	4.13 V	0.14 V	-112 mW	18.79 degC	99762.5 Pa
1769645208	4.14 V	0.14 V	-112 mW	18.43 degC	99762.5 Pa
1769645087	4.14 V	0.14 V	-112 mW	18.51 degC	99750 Pa
1769644967	4.14 V	0.14 V	-112 mW	18.54 degC	99750 Pa
1769644847	4.14 V	0.14 V	-112 mW	18.46 degC	99762.5 Pa
1769644727	4.14 V	0.14 V	-112 mW	18.51 degC	99750 Pa
1769644607	4.14 V	0.14 V	-112 mW	18.46 degC	99750 Pa
1769644487	4.14 V	0.14 V	-112 mW	18.46 degC	99750 Pa
1769644367	4.14 V	0.14 V	-110 mW	18.7 degC	99750 Pa
1769644247	4.14 V	0.14 V	-112 mW	18.57 degC	99750 Pa
1769644127	4.14 V	0.14 V	-112 mW	18.51 degC	99750 Pa
1769644007	4.14 V	0.14 V	-112 mW	18.62 degC	99737.5 Pa
1769643887	4.14 V	0.14 V	-112 mW	18.7 degC	99737.5 Pa
1769643767	4.14 V	0.14 V	-112 mW	18.7 degC	99737.5 Pa
1769643647	4.14 V	0.14 V	-112 mW	18.46 degC	99750 Pa
1769643527	4.15 V	0.14 V	-112 mW	18.3 degC	99750 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Pbat: 0, 2, -4096

Temp: 0, 0.01, 0

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)