This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785850841 | 82 Count | 990 Count | 0 Count | 4.29 VDC | 5.48 VDC |
| 1785849040 | 81 Count | 982 Count | 0 Count | 4.29 VDC | 5.46 VDC |
| 1785847242 | 80 Count | 974 Count | 0 Count | 4.29 VDC | 5.46 VDC |
| 1785845442 | 79 Count | 966 Count | 0 Count | 4.29 VDC | 5.46 VDC |
| 1785843641 | 78 Count | 958 Count | 0 Count | 4.31 VDC | 5.4 VDC |
| 1785841841 | 77 Count | 950 Count | 0 Count | 4.27 VDC | 4.44 VDC |
| 1785840039 | 76 Count | 932 Count | 0 Count | 4.26 VDC | 4.4 VDC |
| 1785838240 | 75 Count | 920 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1785836441 | 74 Count | 910 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1785834642 | 73 Count | 878 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1785832842 | 72 Count | 863 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1785831042 | 71 Count | 840 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1785829242 | 70 Count | 825 Count | 0 Count | 4.23 VDC | 5.42 VDC |
| 1785827442 | 69 Count | 808 Count | 0 Count | 4.24 VDC | 4.34 VDC |
| 1785825642 | 68 Count | 736 Count | 0 Count | 4.23 VDC | 4.32 VDC |
| 1785823843 | 67 Count | 684 Count | 0 Count | 4.22 VDC | 4.34 VDC |
| 1785822043 | 66 Count | 673 Count | 0 Count | 4.22 VDC | 4.34 VDC |
| 1785820244 | 65 Count | 648 Count | 0 Count | 4.22 VDC | 4.32 VDC |
| 1785818443 | 64 Count | 633 Count | 0 Count | 4.22 VDC | 4.32 VDC |
| 1785816644 | 63 Count | 625 Count | 0 Count | 4.22 VDC | 4.34 VDC |
| 1785814845 | 62 Count | 617 Count | 0 Count | 4.22 VDC | 4.34 VDC |
| 1785813046 | 61 Count | 609 Count | 0 Count | 4.21 VDC | 0.92 VDC |
| 1785811248 | 60 Count | 601 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1785809449 | 59 Count | 593 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1785807649 | 58 Count | 585 Count | 0 Count | 4.22 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)