This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791088333 | 75 Count | 757 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791086534 | 74 Count | 747 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791084735 | 73 Count | 737 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791082937 | 72 Count | 728 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791081137 | 71 Count | 719 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791079339 | 70 Count | 705 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791077541 | 69 Count | 696 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791075742 | 68 Count | 686 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791073943 | 67 Count | 677 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791072144 | 66 Count | 667 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791070345 | 65 Count | 658 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791068547 | 64 Count | 641 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791066748 | 63 Count | 632 Count | 0 Count | 4.23 VDC | 0.32 VDC |
| 1791064948 | 62 Count | 623 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1791063149 | 61 Count | 614 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1791061350 | 60 Count | 594 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1791059550 | 59 Count | 585 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1791057751 | 58 Count | 570 Count | 0 Count | 4.24 VDC | 0.32 VDC |
| 1791055953 | 57 Count | 560 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1791054153 | 56 Count | 549 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1791052354 | 55 Count | 540 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1791050555 | 54 Count | 531 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1791048756 | 53 Count | 521 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1791046958 | 52 Count | 507 Count | 0 Count | 4.25 VDC | 0.32 VDC |
| 1791045160 | 51 Count | 498 Count | 0 Count | 4.25 VDC | 0.32 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)