This is the latest recevied telemetry packets stored in our database for station/object AF5LI-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Vsol* | Psys* | Temp* | AirP* |
|---|---|---|---|---|---|
| 1775231705 | 2.92 V | 0.9 V | 392 mW | 22.3 degC | 100925 Pa |
| 1775231597 | 4.15 V | 0.97 V | 398 mW | 23.5 degC | 100912.5 Pa |
| 1775231455 | 4.15 V | 1 V | 398 mW | 21 degC | 100925 Pa |
| 1775231313 | 4.15 V | 0.99 V | 400 mW | 26 degC | 100925 Pa |
| 1775231171 | 4.14 V | 0.95 V | 402 mW | 30.7 degC | 100925 Pa |
| 1775231018 | 4.15 V | 0.97 V | 382 mW | 31.1 degC | 100950 Pa |
| 1775230877 | 4.19 V | 0.98 V | 264 mW | 29.3 degC | 100937.5 Pa |
| 1775230636 | 3.58 V | 0.94 V | 286 mW | 24.7 degC | 100950 Pa |
| 1775230615 | 3.41 V | 0.98 V | 244 mW | 23.5 degC | 100950 Pa |
| 1775230374 | 3.87 V | 0.93 V | 122 mW | 19.6 degC | 100950 Pa |
| 1775230272 | 2.9 V | 0.91 V | 118 mW | 15.8 degC | 100950 Pa |
| 1775230150 | 2.96 V | 0.92 V | 124 mW | 17.3 degC | 100962.5 Pa |
| 1775230029 | 2.93 V | 0.92 V | 100 mW | 17.3 degC | 100962.5 Pa |
| 1775229892 | 3.56 V | 0.93 V | 130 mW | 16.4 degC | 100962.5 Pa |
| 1775229873 | 3.18 V | 0.91 V | 36 mW | 18 degC | 100962.5 Pa |
| 1775229747 | 3.18 V | 0.91 V | 70 mW | 18 degC | 100962.5 Pa |
| 1775229630 | 2.81 V | 0.91 V | 84 mW | 15.9 degC | 100962.5 Pa |
| 1775229510 | 3.12 V | 0.91 V | 108 mW | 18 degC | 100975 Pa |
| 1775229406 | 2.95 V | 0.89 V | 140 mW | 24 degC | 100962.5 Pa |
| 1775229300 | 2.67 V | 0.89 V | 226 mW | 25 degC | 100975 Pa |
| 1775229147 | 3.94 V | 1.02 V | 342 mW | 25.1 degC | 100962.5 Pa |
| 1775229027 | 3.36 V | 1 V | 372 mW | 28.3 degC | 100962.5 Pa |
| 1775229008 | 2.17 V | 0.79 V | 92 mW | 29.2 degC | 100962.5 Pa |
*Used Equation Coefficients:
Vbat: 0, 0.001, 0
Vsol: 0, 0.001, 0
Psys: 0, 2, 0
Temp: 0, 0.1, -100
AirP: 0, 12.5, 500
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)