This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775234309 | 534 Count | 21 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1775233709 | 521 Count | 21 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1775233109 | 514 Count | 21 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1775232509 | 505 Count | 21 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1775231908 | 493 Count | 21 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1775231308 | 481 Count | 21 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1775230708 | 469 Count | 21 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1775230107 | 460 Count | 21 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1775229507 | 451 Count | 21 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1775228906 | 444 Count | 21 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1775228306 | 436 Count | 21 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1775227705 | 426 Count | 21 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1775227105 | 418 Count | 21 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1775226505 | 409 Count | 21 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1775225905 | 400 Count | 21 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1775225304 | 392 Count | 21 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1775224704 | 382 Count | 21 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1775224104 | 373 Count | 21 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1775223504 | 366 Count | 21 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1775222903 | 341 Count | 21 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1775222303 | 323 Count | 21 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1775221702 | 314 Count | 21 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1775221102 | 304 Count | 20 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1775220501 | 295 Count | 19 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1775219901 | 287 Count | 19 Count | 0 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)