This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791134760 | 23 | 34 | 946 | 0 | 0 |
| 1791134160 | 23 | 33 | 946 | 0 | 0 |
| 1791133560 | 24 | 33 | 946 | 0 | 0 |
| 1791132960 | 24 | 33 | 946 | 0 | 0 |
| 1791132359 | 24 | 33 | 946 | 0 | 0 |
| 1791131759 | 24 | 34 | 946 | 0 | 0 |
| 1791131159 | 24 | 35 | 946 | 0 | 0 |
| 1791130558 | 24 | 35 | 946 | 0 | 0 |
| 1791129958 | 24 | 35 | 946 | 0 | 0 |
| 1791129358 | 24 | 34 | 946 | 0 | 0 |
| 1791128757 | 24 | 33 | 946 | 0 | 0 |
| 1791128157 | 25 | 33 | 946 | 0 | 0 |
| 1791127557 | 25 | 32 | 946 | 0 | 0 |
| 1791126957 | 25 | 32 | 946 | 0 | 0 |
| 1791126357 | 25 | 33 | 946 | 0 | 0 |
| 1791125757 | 25 | 33 | 946 | 0 | 0 |
| 1791125156 | 25 | 33 | 946 | 0 | 0 |
| 1791124556 | 24 | 33 | 946 | 0 | 0 |
| 1791123956 | 24 | 34 | 946 | 0 | 0 |
| 1791123355 | 24 | 34 | 946 | 0 | 0 |
| 1791122755 | 24 | 34 | 947 | 0 | 0 |
| 1791122155 | 24 | 34 | 947 | 0 | 0 |
| 1791121555 | 24 | 34 | 947 | 0 | 0 |
| 1791120955 | 24 | 34 | 947 | 0 | 0 |
| 1791120354 | 24 | 33 | 947 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)