This is the latest recevied telemetry packets stored in our database for station/object SP2MG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791092660 | 561 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1791090854 | 559 Count | 34 Count | 34 Count | 4.25 VDC | 0.14 VDC |
| 1791089048 | 557 Count | 34 Count | 34 Count | 4.29 VDC | 0.14 VDC |
| 1791087242 | 555 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1791085436 | 553 Count | 34 Count | 34 Count | 4.25 VDC | 0.14 VDC |
| 1791081804 | 549 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1791079998 | 547 Count | 34 Count | 34 Count | 4.27 VDC | 0.14 VDC |
| 1791078193 | 545 Count | 34 Count | 34 Count | 4.32 VDC | 0.14 VDC |
| 1791076387 | 543 Count | 34 Count | 34 Count | 4.3 VDC | 0.14 VDC |
| 1791074652 | 541 Count | 34 Count | 34 Count | 4.36 VDC | 0.14 VDC |
| 1791072847 | 539 Count | 34 Count | 34 Count | 4.37 VDC | 0.14 VDC |
| 1791069235 | 535 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1791067429 | 533 Count | 34 Count | 34 Count | 4.36 VDC | 0.14 VDC |
| 1791065623 | 531 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1791063818 | 529 Count | 34 Count | 34 Count | 4.33 VDC | 0.14 VDC |
| 1791062012 | 527 Count | 34 Count | 34 Count | 4.31 VDC | 0.14 VDC |
| 1791060206 | 525 Count | 34 Count | 34 Count | 4.35 VDC | 0.14 VDC |
| 1791058400 | 523 Count | 34 Count | 34 Count | 4.22 VDC | 0.14 VDC |
| 1791056594 | 521 Count | 34 Count | 34 Count | 4.24 VDC | 0.14 VDC |
| 1791054788 | 519 Count | 34 Count | 34 Count | 4.24 VDC | 0.14 VDC |
| 1791046346 | 509 Count | 34 Count | 34 Count | 4.24 VDC | 0.14 VDC |
| 1791044541 | 507 Count | 34 Count | 34 Count | 4.26 VDC | 0.14 VDC |
| 1791043514 | 505 Count | 34 Count | 34 Count | 4.34 VDC | 0.14 VDC |
| 1791041708 | 503 Count | 34 Count | 34 Count | 4.23 VDC | 0.14 VDC |
| 1791039902 | 501 Count | 34 Count | 34 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)