APRS Track Direct

My position About ☰

reset

N7UV-44 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UV-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	V_Ext*	RX_rate*
1791125705	4.13 VDC	13.24 VDC	510 pkt/h
1791125105	4.13 VDC	13.18 VDC	480 pkt/h
1791124505	4.14 VDC	13.24 VDC	570 pkt/h
1791123905	4.12 VDC	13.2 VDC	534 pkt/h
1791123305	4.12 VDC	13.2 VDC	510 pkt/h
1791122704	4.13 VDC	13.26 VDC	552 pkt/h
1791122104	4.13 VDC	13.18 VDC	582 pkt/h
1791121504	4.12 VDC	13.2 VDC	474 pkt/h
1791120904	4.13 VDC	13.2 VDC	582 pkt/h
1791120304	4.12 VDC	13.22 VDC	576 pkt/h
1791119704	4.13 VDC	13.26 VDC	600 pkt/h
1791119103	4.13 VDC	13.2 VDC	606 pkt/h
1791118503	4.13 VDC	13.26 VDC	540 pkt/h
1791117903	4.13 VDC	13.18 VDC	594 pkt/h
1791117303	4.12 VDC	13.24 VDC	558 pkt/h
1791116703	4.12 VDC	13.22 VDC	570 pkt/h
1791116103	4.12 VDC	13.18 VDC	606 pkt/h
1791115502	4.12 VDC	13.26 VDC	570 pkt/h
1791114902	4.12 VDC	13.22 VDC	552 pkt/h
1791114302	4.12 VDC	13.24 VDC	546 pkt/h
1791113702	4.11 VDC	13.18 VDC	498 pkt/h
1791113102	4.13 VDC	13.26 VDC	528 pkt/h
1791112501	4.14 VDC	13.2 VDC	558 pkt/h
1791111901	4.13 VDC	13.24 VDC	546 pkt/h
1791111301	4.12 VDC	13.24 VDC	564 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

V_Ext: 0, 0.02, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)