This is the latest recevied telemetry packets stored in our database for station/object CT2HRE-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Atm_Press* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769623787 | 15.5 C | 1011.13 hPa | 0 | 0 | 0 |
| 1769619660 | 14 C | 1011.5 hPa | 0 | 0 | 0 |
| 1769608473 | 21.5 C | 1010.5 hPa | 0 | 0 | 0 |
| 1769605299 | 23.2 C | 1008.63 hPa | 0 | 0 | 0 |
| 1769603822 | 25.1 C | 1008.13 hPa | 0 | 0 | 0 |
| 1769603263 | 22.9 C | 1010.88 hPa | 0 | 0 | 0 |
| 1769600343 | 21.6 C | 1006.63 hPa | 0 | 0 | 0 |
| 1769600078 | 21.7 C | 1008.75 hPa | 0 | 0 | 0 |
| 1769599808 | 22 C | 1006.25 hPa | 0 | 0 | 0 |
| 1769599620 | 22.2 C | 1009.75 hPa | 0 | 0 | 0 |
| 1769599385 | 22.4 C | 1007.38 hPa | 0 | 0 | 0 |
| 1769599005 | 23.3 C | 1010.75 hPa | 0 | 0 | 0 |
| 1769598383 | 22.2 C | 1009.63 hPa | 0 | 0 | 0 |
| 1769598047 | 20.4 C | 1007.25 hPa | 0 | 0 | 0 |
| 1769596832 | 20.7 C | 1009 hPa | 0 | 0 | 0 |
| 1769596593 | 19 C | 1008.5 hPa | 0 | 0 | 0 |
| 1769596367 | 17.9 C | 1007.75 hPa | 0 | 0 | 0 |
| 1769596180 | 16.5 C | 1008 hPa | 0 | 0 | 0 |
| 1769595862 | 13.9 C | 989.88 hPa | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)