APRS Track Direct

My position About ☰

reset

LZ0VRC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0VRC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humi*	Presaure*	Power*
1769684481	4.21 C	82.8 %RH	957 hPa	5.65 V
1769684477	4.21 C	82.8 %RH	957 hPa	5.65 V
1769684177	4.09 C	82.8 %RH	957 hPa	5.67 V
1769683881	4.01 C	82.8 %RH	957 hPa	5.59 V
1769683877	4.01 C	82.8 %RH	957 hPa	5.64 V
1769683577	4.28 C	82.8 %RH	957 hPa	5.64 V
1769683281	3.89 C	82.8 %RH	957 hPa	5.59 V
1769683277	3.88 C	82.8 %RH	957 hPa	5.68 V
1769682977	4.26 C	82.8 %RH	957 hPa	5.67 V
1769682681	4.61 C	82.8 %RH	957 hPa	5.68 V
1769682677	4.61 C	82.8 %RH	957 hPa	5.68 V
1769682377	4.8 C	82.8 %RH	957 hPa	5.62 V
1769682081	4.9 C	82.8 %RH	957 hPa	5.6 V
1769682077	4.9 C	82.8 %RH	957 hPa	5.6 V
1769681777	5.21 C	82.63 %RH	957 hPa	5.64 V
1769681481	4.92 C	82.8 %RH	957 hPa	5.63 V
1769681477	4.92 C	82.8 %RH	957 hPa	5.66 V
1769681177	5.25 C	81.83 %RH	957 hPa	5.68 V
1769680881	5.51 C	80.36 %RH	957 hPa	5.64 V
1769680877	5.51 C	80.28 %RH	957 hPa	5.62 V
1769680581	5.42 C	79.92 %RH	957 hPa	5.6 V
1769680281	5.4 C	79.6 %RH	957 hPa	5.64 V
1769680277	5.4 C	79.6 %RH	957 hPa	5.64 V
1769679977	5.28 C	80.54 %RH	957 hPa	5.67 V
1769679681	5 C	81.51 %RH	957 hPa	5.61 V

*Used Equation Coefficients:

Temp: 0, 0.01, 0

Humi: 0, 0.01, 0

Presaure: 0, 1, 0

Power: 0, 0.01, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)