This is the latest recevied telemetry packets stored in our database for station/object CE1RLP-33. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775222759 | 4.11 VDC | 14.38 VDC | 0 | 0 | 0 |
| 1775221859 | 4.11 VDC | 13.84 VDC | 0 | 0 | 0 |
| 1775220959 | 4.11 VDC | 13.56 VDC | 0 | 0 | 0 |
| 1775220059 | 4.11 VDC | 13.64 VDC | 0 | 0 | 0 |
| 1775219159 | 4.1 VDC | 13.58 VDC | 0 | 0 | 0 |
| 1775218259 | 4.11 VDC | 13.5 VDC | 0 | 0 | 0 |
| 1775217359 | 4.11 VDC | 13.28 VDC | 0 | 0 | 0 |
| 1775215558 | 4.11 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1775213758 | 4.11 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1775211958 | 4.11 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1775210158 | 4.11 VDC | 12.72 VDC | 0 | 0 | 0 |
| 1775208342 | 4.11 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1775207459 | 4.11 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1775206559 | 4.11 VDC | 12.76 VDC | 0 | 0 | 0 |
| 1775205659 | 4.11 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1775204759 | 4.11 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1775203859 | 4.11 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1775202959 | 4.11 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1775202058 | 4.11 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1775201158 | 4.12 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1775200258 | 4.11 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1775199358 | 4.11 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1775198458 | 4.11 VDC | 12.82 VDC | 0 | 0 | 0 |
| 1775197558 | 4.11 VDC | 12.84 VDC | 0 | 0 | 0 |
| 1775196658 | 4.11 VDC | 12.84 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)