This is the latest recevied telemetry packets stored in our database for station/object AE5KM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1764985809 | 455 | 619 | 332 | 0 | 0 |
| 1764985690 | 455 | 618 | 335 | 0 | 0 |
| 1764985570 | 445 | 616 | 339 | 0 | 0 |
| 1764985451 | 463 | 614 | 339 | 0 | 0 |
| 1764985331 | 446 | 610 | 338 | 0 | 0 |
| 1764985211 | 447 | 606 | 341 | 0 | 0 |
| 1764983838 | 450 | 617 | 338 | 0 | 0 |
| 1764983718 | 455 | 616 | 337 | 0 | 0 |
| 1764983599 | 456 | 615 | 338 | 0 | 0 |
| 1764983479 | 454 | 614 | 340 | 0 | 0 |
| 1764983359 | 449 | 613 | 341 | 0 | 0 |
| 1764983120 | 450 | 609 | 343 | 0 | 0 |
| 1764983000 | 458 | 607 | 342 | 0 | 0 |
| 1764982761 | 452 | 600 | 345 | 0 | 0 |
| 1764964038 | 460 | 607 | 343 | 0 | 0 |
| 1764963919 | 456 | 605 | 345 | 0 | 0 |
| 1764963799 | 452 | 602 | 346 | 0 | 0 |
| 1764963679 | 453 | 598 | 610 | 0 | 0 |
| 1764963289 | 457 | 603 | 346 | 0 | 0 |
| 1764963050 | 453 | 598 | 347 | 0 | 0 |
| 1764962930 | 452 | 594 | 351 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)