This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791119347 | 195 Count | 807 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791119047 | 194 Count | 805 Count | 0 Count | 4.2 VDC | 6 VDC |
| 1791118747 | 193 Count | 798 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791118447 | 192 Count | 797 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791118147 | 191 Count | 792 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791117847 | 190 Count | 788 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791117547 | 189 Count | 785 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791117248 | 188 Count | 782 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791116948 | 187 Count | 778 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791116648 | 186 Count | 777 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791116347 | 185 Count | 771 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791116048 | 184 Count | 766 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791115748 | 183 Count | 763 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791115448 | 182 Count | 762 Count | 0 Count | 4.21 VDC | 6 VDC |
| 1791115148 | 181 Count | 756 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791114848 | 180 Count | 755 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791114548 | 179 Count | 750 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791114248 | 178 Count | 744 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791113948 | 177 Count | 742 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791113649 | 176 Count | 741 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791113348 | 175 Count | 736 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791113049 | 174 Count | 734 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791112749 | 173 Count | 727 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791112449 | 172 Count | 723 Count | 0 Count | 4.22 VDC | 6 VDC |
| 1791112149 | 171 Count | 721 Count | 0 Count | 4.22 VDC | 6 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)