APRS Track Direct

My position About ☰

reset

LA1RPG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LA1RPG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*
1780625616	416	33
1780624716	416	33
1780623816	416	33
1780622916	416	33
1780622016	416	33
1780621087	416	33
1780620186	416	33
1780619286	416	33
1780618386	416	33
1780617486	417	33
1780616557	416	33
1780615657	416	33
1780614756	416	33
1780613856	416	33
1780612956	417	33
1780612027	416	33
1780611127	416	33
1780610227	417	33
1780609326	417	33
1780608426	417	33
1780607497	417	33
1780606597	416	33
1780605697	417	33
1780604797	417	33
1780603897	417	33

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)