This is the latest recevied telemetry packets stored in our database for station/object LZ1PDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1780609354 | 2.81 VDC | 0 | 0 | 0 | 0 |
| 1780608451 | 2.92 VDC | 0 | 0 | 0 | 0 |
| 1780607549 | 3.09 VDC | 0 | 0 | 0 | 0 |
| 1780605749 | 3.22 VDC | 0 | 0 | 0 | 0 |
| 1780604847 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1780603946 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1780603042 | 3.32 VDC | 0 | 0 | 0 | 0 |
| 1780602142 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1780601242 | 3.4 VDC | 0 | 0 | 0 | 0 |
| 1780600339 | 3.41 VDC | 0 | 0 | 0 | 0 |
| 1780599439 | 3.42 VDC | 0 | 0 | 0 | 0 |
| 1780598535 | 3.43 VDC | 0 | 0 | 0 | 0 |
| 1780597635 | 3.44 VDC | 0 | 0 | 0 | 0 |
| 1780596728 | 3.45 VDC | 0 | 0 | 0 | 0 |
| 1780595827 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1780594927 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1780594027 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1780593127 | 3.47 VDC | 0 | 0 | 0 | 0 |
| 1780592222 | 3.46 VDC | 0 | 0 | 0 | 0 |
| 1780581574 | 3.55 VDC | 0 | 0 | 0 | 0 |
| 1780581528 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1780579819 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1780578890 | 3.54 VDC | 0 | 0 | 0 | 0 |
| 1780578544 | 3.53 VDC | 0 | 0 | 0 | 0 |
| 1780578259 | 3.54 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)