This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1793761687 | 399 Count | 696 Count | 285 Count | 3.96 VDC | 0.08 VDC |
| 1793760786 | 395 Count | 688 Count | 282 Count | 3.96 VDC | 0.08 VDC |
| 1793759879 | 392 Count | 683 Count | 280 Count | 3.96 VDC | 0.08 VDC |
| 1793758977 | 389 Count | 674 Count | 278 Count | 3.96 VDC | 0.08 VDC |
| 1793758070 | 386 Count | 668 Count | 276 Count | 3.97 VDC | 0.08 VDC |
| 1793757166 | 382 Count | 660 Count | 273 Count | 3.97 VDC | 0.08 VDC |
| 1793756262 | 380 Count | 659 Count | 272 Count | 3.98 VDC | 0.08 VDC |
| 1793755360 | 378 Count | 655 Count | 271 Count | 3.98 VDC | 0.08 VDC |
| 1793754454 | 375 Count | 649 Count | 269 Count | 3.98 VDC | 0.08 VDC |
| 1793753550 | 372 Count | 642 Count | 267 Count | 3.98 VDC | 0.08 VDC |
| 1793752645 | 368 Count | 637 Count | 264 Count | 3.99 VDC | 0.08 VDC |
| 1793751746 | 367 Count | 637 Count | 264 Count | 4 VDC | 0.08 VDC |
| 1793750837 | 366 Count | 636 Count | 264 Count | 4 VDC | 0.08 VDC |
| 1793749932 | 365 Count | 634 Count | 264 Count | 4 VDC | 0.08 VDC |
| 1793749028 | 362 Count | 628 Count | 262 Count | 4.02 VDC | 0.08 VDC |
| 1793748125 | 359 Count | 623 Count | 260 Count | 4.03 VDC | 0.08 VDC |
| 1793747220 | 356 Count | 617 Count | 258 Count | 4.04 VDC | 0.08 VDC |
| 1793746315 | 352 Count | 610 Count | 255 Count | 4.04 VDC | 0.08 VDC |
| 1793745411 | 349 Count | 604 Count | 253 Count | 4.05 VDC | 0.08 VDC |
| 1793744507 | 346 Count | 599 Count | 251 Count | 4.05 VDC | 0.08 VDC |
| 1793743603 | 343 Count | 593 Count | 249 Count | 4.02 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)