This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791104878 | 3608 | 3202 | 3087 | 0 | 0 |
| 1791104159 | 3608 | 3199 | 3087 | 0 | 0 |
| 1791103368 | 3608 | 3199 | 3087 | 0 | 0 |
| 1791102603 | 3608 | 3202 | 3087 | 0 | 0 |
| 1791101713 | 3608 | 3202 | 3087 | 0 | 0 |
| 1791100953 | 3608 | 3202 | 3084 | 0 | 0 |
| 1791100154 | 3608 | 3202 | 3073 | 0 | 0 |
| 1791099259 | 3608 | 3202 | 3073 | 0 | 0 |
| 1791098373 | 3608 | 3202 | 3070 | 0 | 0 |
| 1791096768 | 3608 | 3202 | 3067 | 0 | 0 |
| 1791095898 | 3608 | 3202 | 3061 | 0 | 0 |
| 1791095148 | 3608 | 3202 | 3061 | 0 | 0 |
| 1791094278 | 3611 | 3202 | 3059 | 0 | 0 |
| 1791093459 | 3611 | 3202 | 3056 | 0 | 0 |
| 1791092564 | 3611 | 3202 | 3053 | 0 | 0 |
| 1791091764 | 3611 | 3205 | 3050 | 0 | 0 |
| 1791090898 | 3611 | 3205 | 3050 | 0 | 0 |
| 1791090078 | 3611 | 3202 | 3047 | 0 | 0 |
| 1791089343 | 3611 | 3205 | 3044 | 0 | 0 |
| 1791088624 | 3611 | 3205 | 3044 | 0 | 0 |
| 1791087778 | 3613 | 3205 | 3038 | 0 | 0 |
| 1791087049 | 3613 | 3205 | 3036 | 0 | 0 |
| 1791086329 | 3613 | 3205 | 3030 | 0 | 0 |
| 1791085603 | 3613 | 3205 | 3027 | 0 | 0 |
| 1791084714 | 3613 | 3208 | 3021 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)