This is the latest recevied telemetry packets stored in our database for station/object 9W2MMT-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1769642802 | 4.14 VDC | 0 | 0 | 0 | 0 |
| 1769642694 | 4.82 VDC | 0 | 0 | 0 | 0 |
| 1769642531 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1769642439 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1769642402 | 4.61 VDC | 0 | 0 | 0 | 0 |
| 1769642352 | 4.69 VDC | 0 | 0 | 0 | 0 |
| 1769642313 | 4.32 VDC | 0 | 0 | 0 | 0 |
| 1769642271 | 4.94 VDC | 0 | 0 | 0 | 0 |
| 1769642224 | 4.26 VDC | 0 | 0 | 0 | 0 |
| 1769642185 | 5.03 VDC | 0 | 0 | 0 | 0 |
| 1769642078 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1769642037 | 4.88 VDC | 0 | 0 | 0 | 0 |
| 1769641996 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1769641956 | 4.09 VDC | 0 | 0 | 0 | 0 |
| 1769641910 | 5.02 VDC | 0 | 0 | 0 | 0 |
| 1769641828 | 4.91 VDC | 0 | 0 | 0 | 0 |
| 1769641789 | 5 VDC | 0 | 0 | 0 | 0 |
| 1769641736 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1769641659 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1769641619 | 4.85 VDC | 0 | 0 | 0 | 0 |
| 1769641566 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1769641518 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1769641467 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1769641425 | 4.78 VDC | 0 | 0 | 0 | 0 |
| 1769641385 | 4.44 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)