This is the latest recevied telemetry packets stored in our database for station/object DG1FI-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1775199191 | 3.82 VDC | 20 C | 1017.75 hPa | 0 | 0 |
| 1775197384 | 3.83 VDC | 20.1 C | 1019.75 hPa | 0 | 0 |
| 1775196481 | 3.84 VDC | 20.2 C | 1018.5 hPa | 0 | 0 |
| 1775195577 | 3.85 VDC | 20.1 C | 1018.75 hPa | 0 | 0 |
| 1775194674 | 3.86 VDC | 20.3 C | 1018.5 hPa | 0 | 0 |
| 1775193770 | 3.87 VDC | 20.4 C | 1018.88 hPa | 0 | 0 |
| 1775192867 | 3.88 VDC | 20.5 C | 1017.88 hPa | 0 | 0 |
| 1775191963 | 3.89 VDC | 20.5 C | 1017.13 hPa | 0 | 0 |
| 1775191059 | 3.9 VDC | 20.6 C | 1017.38 hPa | 0 | 0 |
| 1775190155 | 3.91 VDC | 20.4 C | 1018 hPa | 0 | 0 |
| 1775189252 | 3.91 VDC | 20.3 C | 1017.25 hPa | 0 | 0 |
| 1775188348 | 3.92 VDC | 20.5 C | 1018.13 hPa | 0 | 0 |
| 1775187445 | 3.93 VDC | 20.6 C | 1018.88 hPa | 0 | 0 |
| 1775186541 | 3.94 VDC | 20.7 C | 1016.5 hPa | 0 | 0 |
| 1775185637 | 3.96 VDC | 20.8 C | 1017.88 hPa | 0 | 0 |
| 1775184734 | 3.97 VDC | 21.1 C | 1016.63 hPa | 0 | 0 |
| 1775183830 | 3.98 VDC | 21.1 C | 1017.13 hPa | 0 | 0 |
| 1775182927 | 3.98 VDC | 21.4 C | 1016.13 hPa | 0 | 0 |
| 1775182023 | 4 VDC | 21 C | 1016.75 hPa | 0 | 0 |
| 1775181119 | 4.01 VDC | 21.3 C | 1016.75 hPa | 0 | 0 |
| 1775180216 | 4.03 VDC | 21.5 C | 1017.13 hPa | 0 | 0 |
| 1775179312 | 4.03 VDC | 21.2 C | 1016.5 hPa | 0 | 0 |
| 1775178409 | 4.04 VDC | 21.3 C | 1017.88 hPa | 0 | 0 |
| 1775177505 | 4.19 VDC | 21.2 C | 1020.5 hPa | 0 | 0 |
| 1775176602 | 4.05 VDC | 21.3 C | 1016.25 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)