This is the latest recevied telemetry packets stored in our database for station/object BH4QLF-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | SAT* | Temperatu* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785825634 | 23 | 49 °C | 0 | 0 | 0 |
| 1785825454 | 21 | 49 °C | 0 | 0 | 0 |
| 1785825274 | 26 | 49 °C | 0 | 0 | 0 |
| 1785825094 | 26 | 49 °C | 0 | 0 | 0 |
| 1785824914 | 24 | 49 °C | 0 | 0 | 0 |
| 1785824734 | 27 | 49 °C | 0 | 0 | 0 |
| 1785824554 | 25 | 49 °C | 0 | 0 | 0 |
| 1785824374 | 24 | 49 °C | 0 | 0 | 0 |
| 1785824194 | 27 | 49 °C | 0 | 0 | 0 |
| 1785824014 | 28 | 49 °C | 0 | 0 | 0 |
| 1785823834 | 26 | 49 °C | 0 | 0 | 0 |
| 1785823654 | 25 | 49 °C | 0 | 0 | 0 |
| 1785823474 | 26 | 49 °C | 0 | 0 | 0 |
| 1785823293 | 28 | 49 °C | 0 | 0 | 0 |
| 1785823114 | 28 | 49 °C | 0 | 0 | 0 |
| 1785822934 | 28 | 49 °C | 0 | 0 | 0 |
| 1785822754 | 24 | 49 °C | 0 | 0 | 0 |
| 1785822574 | 24 | 49 °C | 0 | 0 | 0 |
| 1785822393 | 25 | 49 °C | 0 | 0 | 0 |
| 1785822214 | 24 | 49 °C | 0 | 0 | 0 |
| 1785822034 | 23 | 49 °C | 0 | 0 | 0 |
| 1785821854 | 25 | 49 °C | 0 | 0 | 0 |
| 1785821674 | 25 | 49 °C | 0 | 0 | 0 |
| 1785821494 | 23 | 49 °C | 0 | 0 | 0 |
| 1785821314 | 23 | 49 °C | 0 | 0 | 0 |
*Used Equation Coefficients:
SAT: 0, 1, 0
Temperatu: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)