This is the latest recevied telemetry packets stored in our database for station/object SQ1JKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1769673716 | 178 Count | 72 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1769671913 | 177 Count | 72 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1769670110 | 176 Count | 72 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1769668307 | 175 Count | 72 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1769666505 | 174 Count | 72 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1769664702 | 173 Count | 72 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1769662899 | 172 Count | 72 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1769661096 | 171 Count | 72 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1769655723 | 168 Count | 72 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1769653920 | 167 Count | 72 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1769652117 | 166 Count | 72 Count | 0 Count | 4.11 VDC | 0.14 VDC |
| 1769650314 | 165 Count | 72 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1769648512 | 164 Count | 72 Count | 0 Count | 4.1 VDC | 0.14 VDC |
| 1769646709 | 163 Count | 72 Count | 0 Count | 4.09 VDC | 0.14 VDC |
| 1769644905 | 162 Count | 72 Count | 0 Count | 4.07 VDC | 0.14 VDC |
| 1769643103 | 161 Count | 72 Count | 0 Count | 4.13 VDC | 0.14 VDC |
| 1769641300 | 160 Count | 72 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1769639497 | 159 Count | 72 Count | 0 Count | 4.12 VDC | 0.14 VDC |
| 1769637694 | 158 Count | 72 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1769635891 | 157 Count | 72 Count | 0 Count | 4.09 VDC | 0.14 VDC |
| 1769634123 | 156 Count | 72 Count | 0 Count | 4.16 VDC | 0.14 VDC |
| 1769632320 | 155 Count | 72 Count | 0 Count | 4.15 VDC | 0.14 VDC |
| 1769630517 | 154 Count | 72 Count | 0 Count | 4.14 VDC | 0.14 VDC |
| 1769628714 | 153 Count | 72 Count | 0 Count | 4.09 VDC | 0.14 VDC |
| 1769626912 | 152 Count | 72 Count | 0 Count | 4.13 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)