This is the latest recevied telemetry packets stored in our database for station/object DL5SMB-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1785858707 | 8 Nr | 12.76 Vdc | 0 | 0 | 0 |
| 1785858522 | 8 Nr | 12.77 Vdc | 0 | 0 | 0 |
| 1785858338 | 9 Nr | 12.77 Vdc | 0 | 0 | 0 |
| 1785858154 | 6 Nr | 12.77 Vdc | 0 | 0 | 0 |
| 1785857970 | 7 Nr | 12.78 Vdc | 0 | 0 | 0 |
| 1785857786 | 8 Nr | 12.8 Vdc | 0 | 0 | 0 |
| 1785857602 | 7 Nr | 12.82 Vdc | 0 | 0 | 0 |
| 1785857417 | 10 Nr | 12.88 Vdc | 0 | 0 | 0 |
| 1785857233 | 9 Nr | 13.28 Vdc | 0 | 0 | 0 |
| 1785857213 | 9 Nr | 13.27 Vdc | 0 | 0 | 0 |
| 1785857193 | 10 Nr | 13.29 Vdc | 0 | 0 | 0 |
| 1785857168 | 9 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1785857149 | 7 Nr | 13.36 Vdc | 0 | 0 | 0 |
| 1785857129 | 7 Nr | 13.3 Vdc | 0 | 0 | 0 |
| 1785857110 | 7 Nr | 13.37 Vdc | 0 | 0 | 0 |
| 1785857071 | 8 Nr | 13.37 Vdc | 0 | 0 | 0 |
| 1785857012 | 9 Nr | 13.35 Vdc | 0 | 0 | 0 |
| 1785856777 | 9 Nr | 13.34 Vdc | 0 | 0 | 0 |
| 1785856738 | 9 Nr | 13.34 Vdc | 0 | 0 | 0 |
| 1785823243 | 4 Nr | 13.52 Vdc | 0 | 0 | 0 |
| 1785823067 | 4 Nr | 13.55 Vdc | 0 | 0 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)