This is the latest recevied telemetry packets stored in our database for station/object IW2HTZ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785851012 | 22 Count | 148 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785850108 | 21 Count | 140 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785849204 | 20 Count | 134 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785847396 | 18 Count | 118 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785846492 | 17 Count | 113 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785845588 | 16 Count | 108 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785844684 | 15 Count | 101 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785843780 | 14 Count | 94 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785842876 | 13 Count | 83 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785841972 | 12 Count | 78 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785841068 | 11 Count | 73 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785840164 | 10 Count | 67 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785839261 | 9 Count | 56 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785838357 | 8 Count | 53 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785837453 | 7 Count | 48 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785836549 | 6 Count | 43 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785835645 | 5 Count | 36 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785834737 | 4 Count | 30 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785833837 | 3 Count | 22 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785832929 | 2 Count | 15 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785832029 | 1 Count | 9 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785831121 | 0 Count | 0 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785830310 | 130 Count | 998 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785829410 | 129 Count | 992 Count | 0 Count | 0.28 VDC | 0 VDC |
| 1785828506 | 128 Count | 988 Count | 0 Count | 0.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)