This is the latest recevied telemetry packets stored in our database for station/object LA4WGA-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Rel_Hum* | Atm_Press* | Value5* |
|---|---|---|---|---|---|
| 1775214172 | 3.42 VDC | 18.4 C | 41.93 % | 1000 hPa | 0 |
| 1775211557 | 3.6 VDC | 18.7 C | 42.42 % | 1002.13 hPa | 0 |
| 1775205842 | 3.7 VDC | 26 C | 35.06 % | 1003.75 hPa | 0 |
| 1775205692 | 3.69 VDC | 25.3 C | 35.28 % | 1003.38 hPa | 0 |
| 1775205545 | 3.69 VDC | 24.9 C | 35.94 % | 1003.5 hPa | 0 |
| 1775205384 | 3.68 VDC | 24.4 C | 35.21 % | 1001.38 hPa | 0 |
| 1775204774 | 3.64 VDC | 21.8 C | 38.79 % | 998 hPa | 0 |
| 1775204616 | 3.63 VDC | 21.1 C | 37.51 % | 1002 hPa | 0 |
| 1775202300 | 3.63 VDC | 22.4 C | 39.2 % | 1004.5 hPa | 0 |
| 1775202147 | 3.62 VDC | 21.6 C | 39.69 % | 1004.38 hPa | 0 |
| 1775201230 | 3.6 VDC | 13.5 C | 49.92 % | 1003.38 hPa | 0 |
| 1775200905 | 3.6 VDC | 10.3 C | 56.03 % | 1002.5 hPa | 0 |
| 1775200724 | 3.56 VDC | 9.1 C | 65.54 % | 1000.63 hPa | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)