This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775208288 | 173 Count | 341 Count | 158 Count | 4.12 VDC | 0 VDC |
| 1775206488 | 159 Count | 314 Count | 145 Count | 4.11 VDC | 0 VDC |
| 1775204687 | 149 Count | 295 Count | 136 Count | 4.11 VDC | 0 VDC |
| 1775202886 | 139 Count | 276 Count | 127 Count | 4.11 VDC | 0 VDC |
| 1775201086 | 126 Count | 250 Count | 115 Count | 4.11 VDC | 0 VDC |
| 1775199285 | 113 Count | 225 Count | 103 Count | 4.11 VDC | 0 VDC |
| 1775197484 | 105 Count | 209 Count | 96 Count | 4.11 VDC | 0 VDC |
| 1775195683 | 93 Count | 185 Count | 85 Count | 4.1 VDC | 0 VDC |
| 1775193883 | 82 Count | 163 Count | 75 Count | 4.11 VDC | 0 VDC |
| 1775192082 | 70 Count | 140 Count | 64 Count | 4.1 VDC | 0 VDC |
| 1775190281 | 59 Count | 119 Count | 54 Count | 4.11 VDC | 0 VDC |
| 1775188481 | 50 Count | 98 Count | 46 Count | 4.1 VDC | 0 VDC |
| 1775186680 | 41 Count | 79 Count | 38 Count | 4.11 VDC | 0 VDC |
| 1775184880 | 31 Count | 60 Count | 29 Count | 4.11 VDC | 0 VDC |
| 1775183079 | 19 Count | 36 Count | 18 Count | 4.11 VDC | 0 VDC |
| 1775181278 | 8 Count | 15 Count | 8 Count | 4.11 VDC | 0 VDC |
| 1775179478 | 540 Count | 1024 Count | 496 Count | 4.11 VDC | 0 VDC |
| 1775177677 | 527 Count | 1000 Count | 484 Count | 4.11 VDC | 0 VDC |
| 1775175876 | 517 Count | 981 Count | 475 Count | 4.11 VDC | 0 VDC |
| 1775174076 | 503 Count | 955 Count | 462 Count | 4.11 VDC | 0 VDC |
| 1775172275 | 493 Count | 938 Count | 453 Count | 4.11 VDC | 0 VDC |
| 1775170475 | 481 Count | 914 Count | 442 Count | 4.11 VDC | 0 VDC |
| 1775168674 | 473 Count | 898 Count | 435 Count | 4.11 VDC | 0 VDC |
| 1775166873 | 462 Count | 876 Count | 425 Count | 4.11 VDC | 0 VDC |
| 1775165072 | 450 Count | 848 Count | 414 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)