This is the latest recevied telemetry packets stored in our database for station/object SR9BBC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1780646938 | 8 Count | 267 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780646037 | 6 Count | 188 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780645137 | 3 Count | 125 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780644236 | 2 Count | 67 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780643335 | 36 Count | 1048 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780642434 | 34 Count | 942 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780641533 | 31 Count | 874 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780640632 | 29 Count | 800 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780639732 | 26 Count | 744 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780638831 | 23 Count | 683 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780637930 | 21 Count | 618 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1780637029 | 19 Count | 555 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780636128 | 16 Count | 492 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780635227 | 14 Count | 427 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780634326 | 11 Count | 372 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780633425 | 9 Count | 298 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780632524 | 6 Count | 225 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780631624 | 4 Count | 151 Count | 0 Count | 4.11 VDC | 0 VDC |
| 1780630722 | 1 Count | 88 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780629822 | 37 Count | 1006 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780628921 | 34 Count | 952 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780628020 | 32 Count | 880 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780627119 | 29 Count | 808 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1780626218 | 27 Count | 732 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1780625318 | 24 Count | 672 Count | 0 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)